STEP BY STEP
BEGIN BY TEST-FITTING PLACEMENT OF HITCH HARNESS™
1
It is recommended to install on a flat surface on the side of your truck bed.
-
Receiver hitch will need enough clearance when removing from your Hitch Harness™ to ensure it doesn't hit the top or your truck bed.
-
We also recommend you mount as low as possible in the pickup box to there is about 1/8" gap from the bottom of your receiver shank to the truck bed floor.
ALIGN YOUR CENTER HOLD AND BEGIN DRILLING
2
-
Using a drill, drill the center hole and then use a rivet gun to secure with a rivet (use a level if desired or adjust to your liking).
-
Continue by selecting one of the top holes and repeating previous steps. Once your Hitch Harness™ is stationed with two (2) rivets, finish drilling and riveting in a corner-to-corner pattern until all holes are completed.
BEGIN UTILIZING YOUR HITCH HARNESS™
3
-
Once secured with rivets, you can begin using your Hitch Harness™! You now have a truck bed with a secure and safe way to store your receiver hitches.
Please reach out if you have any further questions.